Hardware Features

Bottom of 6330-MX

  1. Power Socket
  2. PoE Ethernet Port
  3. LAN Ethernet Port
  4. WAN Ethernet Port

Front of the 6330-MX

  1. USB Port

Back of the 6330-MX

  1. Lock Slot
  2. Manual SIM Select Button
  3. Erase Button

The SIM button is used to manually toggle between the two SIM slots included in the CM module. (For more information about the plug-in module, click here.)

The ERASE button is used to perform device reset, and it has three modes. 1) Configuration reset, 2) Full device reset, 3) Firmware reversion:

  1. Single pressing the ERASE button will reset the device configurations to factory default, it will not remove any automatically generated certificates/keys.
  2. Two presses: After the device reboots from the first button press and by pressing the button again before the device is connected to the internet, the device configurations and generated certificates/keys will also be removed.
  3. Press and hold the ERASE button and then power on the device will boot the firmware that was used prior to the current version.