1. Plug the power supply unit into an AC power outlet
2. Connect the PSU to the MX.

If your device needs to be positioned some distance from either the nearest AC power outlet or site network equipment, using the included passive Power-over-Ethernet (PoE) injector will simplify the installation cabling and allow for improved cellular signal strength. The POE injector cable allows the DC power and Ethernet connection to be run to the Accelerated 6330-MX via the Ethernet connection only.

1. Plug the power supply unit into an AC power outlet and connect to the PoE injector.
2. Connect an Ethernet cable from the RJ45 socket/jack on the PoE injector, (marked ‘POE’), to the Ethernet port of the device.
3. Run another Ethernet cable from the PoE injector's LAN port to the client device that will be associated with the MX's first Ethernet port (marked '1/POE').

The LED marked IN will illuminate when the PoE injector is receiving power from the PSU. The LED marked OUT lights up green when an Ethernet connection is recognized by the MX.

If the IN LED is not illuminated check the following:

• Ensure that the PSU is plugged into an AC power outlet and is receiving power.
• Ensure that the PSU’s power plug is correctly connected to the POE injector cable power input socket.

If the OUT LED is not illuminated after connecting to the 6330-MX, verify the integrity of the Ethernet cable.