Initial Setup
- Insert your activated SIM card provided by your cellular network operator. The metal contacts should be facing down. You should hear a click sound once the SIM is completely inserted.
- For maximum performance, attach both of the included antennas. While gripping the metal connector section with your thumb and forefinger, tighten until the antenna is secure. Do not tighten the antenna by holding any part of the plastic housing.
- Connect the power supply unit or Ethernet cable (for PoE), or if doing a site survey, attach the temporary battery pack and follow the instructions in the Site Survey section.
* If a single antenna solution is required, it must be attached to the main antenna port labeled ‘ANT2’