AT Command Access

To gain AT command access through the 6300-CX, the tester must have a PC/laptop connected the LAN Ethernet port of the 6300-CX. They will need to configure a static IP on the PC/laptop of 192.168.210.2/24 with a gateway of 192.168.210.1

  • Open a SSH session to the 6300-CX at 192.168.210.1. Default login credentials are:
    • username: root
    • password: default
  • Select a to access the Admin CLI. If the SSH session immediately gives you the # prompt, you are already in the Admin CLI.
  • Type atcmd and press Enter. Type n when the SR prompts you if you want exclusive access. This allows you to send AT commands to the device while still allowing the device to connect, disconnect, and/or reconnect to the Sprint network.
  • Example AT command access below:
$ ssh [email protected]
Password:

Access selection menu:

a: Admin CLI
s: Shell
q: Quit

Select access or quit [admin] : a

Connecting now, 'exit' to disconnect from Admin CLI ...

# atcmd

Do you want exclusive access to the modem? (y/n) [y]: n
Starting terminal access to modem AT commands.
Note that the modem is still in operation.

To quit enter '~.' ('~~.' if using an ssh client) and press ENTER

Connected
ati
Manufacturer: Sierra Wireless, Incorporated
Model: MC7354
Revision: SWI9X15C_05.05.16.02 r21040 carmd-fwbuild1 2014/03/17 23:49:48
MEID: 35922505082765
ESN: 12803341918, 8032FE5E
IMEI: 359225050827658
IMEI SV: 11
FSN: J8513103240310
+GCAP:
Click to copy