Physical Setup

There is a label on the bottom of the SR-series router that indicates the plug-in modem's IMEI number.

(The modem is referred to as the 1002-CM.)

Verify this IMEI number is an exact match to that on the plug-in modem itself, as well as the label on the router's packaging.

The plug-in modem must be installed before connecting the cellular antennas.

  1. Affix the two WiFi antennas to the connectors situated closest to the power socket (6350-SR only).
  2. Connect the power supply to the corresponding 12V socket on the device's back panel.
  3. Gather the two cellular antennas, activated SIM card (2FF), and plug-in modem. These will be explained later.