Single USB Modem Setup
Goal
To configure a cellular WAN interface on an Accelerated device using an external USB modem.
NOTE: Accelerated's SR- and MX-series devices have USB ports.
Setup
This article assumes the USB-driven connection will serve as the only WAN.
For this setup, you will need an active Internet connection on the supported USB modem.
NOTE: Accelerated devices only support the following USB modems:
Officially Supported:
- Sierra Wireless 340u (AT&T Beam)
- Sierra Wireless 313u (AT&T Momentum)
- Sierra Wireless 313u (T-mobile Unlocked Momentum)
- Aircard 320u (Telstra 4G)
- Novatel U620L (Verizon)
- Pantech UML290 (Verizon)
- Pantech UML295 (Verizon)
Sierra Wireless 340u note: The Beam is officially supported but under certain signal strength conditions we recommend they use the included USB extension cable that comes with the Beam Air Card
Supported, Modem Configuration Required*:
Netgear 341u (Sprint)
*Refer to our FAQ for More Information
Sample
The sample configuration below shows an Accelerated device with a single cellular Internet connection using a supported USB modem.
![](https://media.screensteps.com/image_assets/assets/001/770/552/original/1f3f5596-ed48-4f1e-b8f9-6f662233a1ee.png)