Hardware Features
Right Side of 6310-DX
- LAN/PoE Port
- WAN Port
- SIM Select Button
- Factory Reset Button
- Power Socket
The SIM button is used to manually toggle between the two SIM slots included in the CM module. (For more information about the plug-in module, click here.)
The ERASE button is used to perform device reset, and it has three modes. 1) Configuration reset, 2) Full device reset, 3) Firmware reversion:
- Single pressing the ERASE button will reset the device configurations to factory default, it will not remove any automatically generated certificates/keys.
- Two presses: After the device reboots from the first button press and by pressing the button again before the device is connected to the internet, the device configurations and generated certificates/keys will also be removed.
- Press and hold the ERASE button and then power on the device will boot the firmware that was used prior to the current version.
Front of the 6310-DX
- Connection Indicator
- Signal Bar Indicators
Back of the 6310-DX
- LAN/WAN Indicator
- SIM1/2 Indicator